Dongguan City and Yong Hot Melt Adhesive Co., Ltd.
Mobile: 13712835141
Mobile: 13602367580
Mobile: 13925707533
Contact: Mr. Yan / Miss Shen
Phone: 0769-82138709
Address: Room 101, Building 3, No. 598, Zhangmutou Section, Dongshen Road, Zhangmutou Town, Dongguan City, Guangdong Province
News
C
聯(lián)系我們
ontact us
Industry News
Hot melt adhesive industry new technology
Source： Time：2018-06-29 09:31:41 views：
1. Low temperature hot melt adhesive:
Low-temperature hot-melt adhesives have broken through the limits of the use of conventional hot melt adhesives. Its normal operating temperature is only 110 ° C ~ 130 ° C, low temperature hot melt adhesive is 30 ° C lower than the traditional hot melt adhesive. Compared with traditional hot melt adhesives, low temperature hot melt adhesives have significantly
1. Low temperature hot melt adhesive:
Low-temperature hot-melt adhesives have broken through the limits of the use of conventional hot melt adhesives. Its normal operating temperature is only 110 ° C ~ 130 ° C, low temperature hot melt adhesive is 30 ° C lower than the traditional hot melt adhesive. Compared with traditional hot melt adhesives, low temperature hot melt adhesives have significantly lower viscosity values, ensuring that the coating process requirements are met under low temperature operating conditions.
The direct benefit of low temperature hot melt adhesives is the savings in electricity and machine maintenance. A large number of practical applications show the same hot melt machine, using low temperature hot melt adhesive can save customers about 15% of the electricity bill. However, since the low-temperature hot-melt adhesive has almost no aging phenomenon such as skinning and carbon deposition at its normal operating temperature of 110 ° C to 130 ° C, the maintenance cost of the machine is greatly reduced. More importantly, low temperature hot melt adhesive will not burn PE film.
2. Hydrophilic hot melt adhesive:
Conventional hot melt adhesives are generally hydrophobic, and hydrophilic hot melt adhesives are made hydrophilic by special formulations. Each application of hydrophilic hot melt adhesives can give higher value to the products and produce products. In the current highly competitive market, manufacturers effectively differentiate their products and ultimately win consumers.
3. Other new technologies for hot melt adhesives:
In addition to the above aspects, the new technology of hot melt adhesives also includes: oil-resistant hot melt adhesive; hot melt adhesive suitable for high frequency spraying; high wet strength hot melt adhesive; degradable hot melt adhesive and so on.
